Help:Lamp
From CanonBase
Contents
Introduction
The properties below are specific for lamps and lamp types. They are to be used on top of the general equipment properties described in the Equipment help page.
Example: Projection lamp 1000 Watt - E40 socket with side mirror Example: Projection lamp 500 Watt - P28s socket with side mirror
Header
Label*
- Short name based on main properties, as used in documentation
Description
- In most cases a description is not needed
Also known as
- Add type numbers to facilitate searching.
- Put the name of the manufacturer in front of the type number
Functional properties
These properties are needed for the functioning and structuring of the database.
Field (P19)
- Always lighting and projection (Q7)
Type of information (P11)
- Always equipment (Q50)
- Type of equipment(P50)
- Always lamp (Q3076)
Part of value list (P118)
- Always Lamp type value list (Q622)
Specific properties for lamps
Lamp
Light source (P127)
- The way the light is produced
Light source value list (Q32854)
Lamp base (P162)
- The type of base of the lamp.
- The oposite of lamp base is Lamp socket (P322)
Lamp socket value list (Q3127)
Electric
Lamp maximum wattage (P192)
- the lamp wattage as mentioned on the lamp
- prefered Unit is Watt
Voltage (P335)
- The normal working voltage as mentioned on the lamp
- Unit is Volt
Optics
Lamp mirror type (P336)
- Type of mirror on or in the lamp
Lamp mirror type expected vallue list (Q12426)
Measurements
Lamp LCL (P337)
- Light center length (LCL), The distance from the light center to a specified reference point on the lamp. Mostly measured from the bottom of the lamp base.
- Preferabe unit is mm
Lamp diameter (P338)
- Diameter measured on the whidest point
- Preferabe unit is mm
Lamp lenght (P339)
- Measured from bottom fitting to top lamp
- Preferabe unit is mm
References to types
- Refers to different makes of this lamp, often by different brands
Type number (P321)
- Combine brand and type number
- Can have multiple values